Note for Windows users: If you have multiple user accounts on your computer, you may be prompted to input administrator credentials in order to run the application. Once downloaded, the application will prompt you to connect your speaker to your computer with a micro USB cable. Then start the application from your hard drive and follow the prompts to perform the update. Wait for your computer to download the file.
It will appear on your desktop as a hard drive icon. A window should open. Drag the updater file to the desktop as indicated. If the window doesn't open, double-click the icon. The PC or Mac used for the update must meet the minimum system requirements found on the download site.
While the application is running, it will create and utilise temporary working files. When the application has finished and closed, it will remove all temporary working files, leaving behind the driver and the downloaded application file Windows machines only.
The application file can be deleted from your computer after the update is complete, but we recommend leaving the driver installed on your computer to make future upgrades easier. Press and hold the Source button on the BTS 2. The status light should flash blue quickly.
After making sure Bluetooth is turned off on any nearby devices other that the one you want to connect to, turn the speaker on. It will automatically go into Bluetooth pairing mode. The indicator light on the speaker will be flashing green and blue indicating pairing mode. The speaker will automatically connect with the last paired device if turned off and back on, provided it is within range. To connect to a new device, turn off Bluetooth on the previous device.
Press the power button on the headset for at least five seconds. The LED should flash red and blue, indicating the headset is in pairing mode. Press and hold the power button on the headset for about 5 seconds. The indicator light will flash red and blue intermittently, showing the device is in pairing mode. Start with the speaker Off.
Power on the speaker and ensure that the blue indicator light flashes quickly, indicating it is in pairing mode. Press Bluetooth button once to select Bluetooth as your audio source.
Press and hold approximately 2 seconds to enter into Bluetooth pairing mode. The BT light will start flashing when ready to pair with your Bluetooth device and solid blue when the pairing is ready and music can be played.
Pairing mode will be indicated by a blue blinking LED indicator light. Press the Bluetooth button on the speaker. A blue Bluetooth LED should come on in the speaker grill. This action will clear all paired devices that were previously paired to the HeshBT, and it will then enter directly into pairing mode. Make sure the earbuds are off.
Press and hold the Multi-function button for approximately 2 seconds, then release. The LED indicator should flash blue quickly. This means the earbuds are in pairing mode. Move the switch on the back of the speaker to the center position so it is under the Bluetooth logo. The speaker will attempt to connect to previously paired devices for 10 seconds, and the LED on the back will flash blue.
If a previously paired device is found, it will pair and the LED will become solid blue. If prompted to enter a pairing password enter The LED becomes solid blue if it pairs successfully.
The speaker exits pairing mode after 2 minutes if no device connects. Power on the speaker by pressing the Power button.
The Pairing Indicator will flash blue quickly. When pairing, remain within 3 feet of the Bluetooth adapter. This speaker will retain the pairing as long as it is retained in the currently paired device, so be sure to turn off Bluetooth in that device before pairing your speaker with the Plugable Bluetooth adapter. The LED blinks blue and red alternately. Pairing mode is activated. On your speaker, press the Source button.
Your speaker enters pairing mode, and the LED blinks. Note: Press and hold the Source button to return to pairing mode. Power on the Explorer Bluetooth. Press the Disconnect button to remove any previous connections and reset the Bluetooth module.
The speaker should go into pairing mode. Power on Plunge and it will automatically go into pairing mode to search for Bluetooth devices. You will know you are in pairing mode when the Bluetooth icon is slowly flashing. Start with the headset off. Press and hold the multi-function button on the headset until the LED flashes blue. Wear the headset and follow the audio instructions. Pairing mode will be announced and the Bluetooth light will flash.
The Bluetooth light should blink indicating the speaker is ready to pair. On your speaker, press and hold down the power button for 5 seconds. The Bluetooth indicator will begin to quickly flash in blue.
Start with the headphones Off. A blue light should blink fast. Ensure that the headset is turned off very important. Press the Pairing button multi-function button for approximately seconds until the red and blue light flash alternately which indicates that you are in Pairing Mode. Turn off the right bud by pressing the multi-function button for 3 seconds. Enter pairing mode by pressing the multi-function button for 6 seconds. The LED should flash green to indicate pairing mode.
With headphones turned off and within 1 meter 3 feet of the music device, press and hold the center key for at least 4 seconds until the status indicator flashes red and green and a voice prompt says 'Searching for your music device. Then power on and press the Bluetooth button to enter pairing mode. Double-tap the JBL logo then hold for 5 seconds to bring the earphone into pairing mode.
The LED will flash. Make sure headphones are turned on, and press and hold the Bluetooth button located at the bottom of the right ear cup until there is a flashing blue light.
Hold down the Bluetooth button for at least 3 seconds, until the light flashes blue. You are now in pairing mode. When the devices connect, you will hear a tone from the FLIP3 indicating it is successful.
Turn the FLIP 4 on by pressing the power button. To put it in pairing mode, hold down the Bluetooth button for at least 3 seconds, until the light flashes blue.
You will hear a tone from the FLIP indicating when pairing is successful. On your speaker, press and hold down the Bluetooth button until blue lights go up and down the speaker. Press and hold the Multifunction Button MFB for 5 seconds until the Bluetooth indicator light flashing red and blue alternately.
With the headphones powered off, press and hold the Power Button for 10 seconds, until a fast blinking read and blue light indicates the headphones are in pairing mode. Ensure the headphones are powered off, then enter the pairing mode on the headphones by pressing and holding the multifunction button for 7 to 10 seconds until the blue and red lights start flashing alternatively Note — do not release when you see only the blue light.
Start with the headphones OFF. Move the power switch to the center position to turn the headphones ON. The LED will flash blue. Next, move the switch all the way to the left and hold for four seconds to enter pairing mode.
The LED will flash blue and red. With the power off on your headset, press the CALL button and slide the Power switch to the ON position at the same time for 2 seconds. Press and hold the Call button and slide the Power switch to the ON position to turn it on. The blue Indicator lamp turns on, and the HBS enters pairing mode. Hold the CALL button for about 2 seconds.
On your LG soundbar, select the Bluetooth function by using the Bluetooth button on the remote control or F on the unit until the function is selected. Select the input source to BT Bluetooth by pressing F button on the remote or soundbar repeatedly. Press and hold the power button for 3 seconds to turn on the Bluetooth speaker, it will sound a voice prompt has been successfully booted.
A successful connection will sound a tone. It will initiate pairing and the LED will start blinking. Press the Bluetooth button. The status light blinks rapidly to indicate the speakers are ready for pairing.
You can pair a new device to Get Together by holding the Bluetooth button for 3 seconds. The LED will blink blue indicating device is in pairing mode. Ensure that the Stanmore Bluetooth is powered on. Push the pair button. The red bluetooth indicator starts to flash rapidly.
Hold the sliding switch in the Bluetooth position for 2 seconds. The light will pulse when headphone is in pairing mode. Starting with the headphones turned off, press the center Multifunction button with the phone symbol until you hear that it is in pairing mode, and the LED flash red and blue. Long press the Power button on the headphones for four seconds until the LED light flashes red and blue alternatively.
On the headphones, press and hold the power button for 4 seconds until you hear 'Power on, pairing. Turn Off the headset. You will also hear a voice prompt. With the headset power off, long press the Power On button for about 3 seconds until the LED flash red and blue alternatively. With your headphones completely turned off, press the power button for five seconds. The LED should flash, indicating the headphones are in pairing mode.
On your speaker, press and hold down the Bluetooth button for 3 seconds. The blue light will begin flashing and the OontZ Angle 3 is ready to pair and connect. Press the 'power on' button for 5 seconds until blue and red LEDs flash alternatively and a voice prompt says 'pairing.
Wait until both red and blue light up. While the headphones are off, hold the power button for 5 seconds. The LED on the side will alternatively flash red and blue.
A voice will say the device is ready to pair. After pairing completes, the voice will say the device has been paired successfully. Press and hold the middle button and you will hear a 'Power On' message. Continue holding until you hear 'Pairing. Turn On the headphones. Make sure that the headphones are fully charged and turned off. Press and hold the Bluetooth button until the blue and white LED flashes alternatively.
Enter pairing mode on the headphones. To do this, turn off power to the headphones, then hold down the power button until the LED indicator alternatively flashes blue and red. Start with the headphones turned off.
Using outdated or corrupt Bose drivers can cause system errors, crashes, and cause your computer or hardware to fail. Furthermore, installing the wrong Bose drivers can make these problems even worse. Recommendation: If you are inexperienced with updating Bose device drivers manually, we highly recommend downloading the Bose Driver Utility. This tool will download and update the correct Bose driver versions automatically, protecting you against installing the wrong Bose drivers.
This page contains information about installing the latest Bose Speaker driver downloads using the Bose Driver Update Tool. Bose Speaker drivers are tiny programs that enable your Speaker hardware to communicate with your operating system software.
0コメント